Panasonic FP2-PP2T Technical Manual page 99

Axis [Group]
Synchronous group
Synchronous mode
Synchronous
condition
Current value
Unit
Deviation (Pulse)
JOG target speed
JOG [+]
JOG [-]
State of axis]
Error code
Error clear
Warning code
Warning clear
Speed rate
Note:
If a recoverable error occurred in the positioning unit, click [Error Clear] to clear the error.
If a warning occurred in the positioning unit, click [Warning Clear] to clear the warning.
2. Click the JOG[+] for the JOG operation in the forward rotation. Click the JOG[-] for the JOG
operation in the reverse rotation.
3. Click [Close] to close the dialog.
Note:
This dialog cannot be closed during the JOG operation.
The axis numbers and group names to be monitored.
The group name and the master/slave axis type for the synchronous
operation.
The operation mode for the synchronous operation.
Monitor the synchronous/asynchronous condition in the synchronous
operation.
For the synchronous operation in the operation mode A, clicking
[Synchronous change] changes the condition.
Monitor the feedback value for every axis after unit conversion.
Clicking [Current value update] displays the dialog for inputting the value,
and it enables to change the current value.
Monitor the unit of positions for the axes specified in the parameter settings
each from the positioning unit.
Monitor the deviation when activating the moving amount automatic check
function.
Monitor and display the target speed in the JOG operation.
Click [Change] to change the target speed for the JOG operation.
Click [+] to perform the forward rotation.
Click [-] to perform the reverse rotation.
The operating states of axes or error and warning occurrences.
The latest error code when an error occurred.
Clear the error by clicking this button, when an error occurred.
Indicate the latest warning code when a warning occurs.
Clear the warning by clicking this button, when a warning occurred.
The target speed of the home return specified in the parameter settings for
each axis is regarded as 100%, and the operation is executed in the
specified speed rate.
Clicking [Speed rate] shows the dialog for inputting the value.
7-37