Panasonic FP2-PP2T Technical Manual page 227

Offset
Name
address
048H
Pulser operation
maximum speed
049H
04AH Coordinate
origin value
04BH
04CH -
04DH -
04EH -
04FH -
Starting address of each positioning parameter
Axis 1 Axis 2
Bank No.
02H 0CH
Descriptions
The maximum speed when selecting the speed limit for the pulser operation
method.
When the speed calculated by multiplying (pulser operation numerator / pulser
operation denominator) by the pulser input is ver the specified maximum speed,
the operation is performed at the maximum speed.
Unit: Set unit X1000/s
Input range: 0 to 32767000 (pulse/s)
Default: 0
If this area has been set to 0, it is the minimum speed in the set unit.
*
Stores the coordinate origin value after the home return.
-
-
-
-
Axis 3 Axis 4
16H 20H
Address Descriptions
050H Starting address of parameters
Default Setting
Unit
value range
17-37