Use Of Function Keys - Toshiba TS3000 Series Instruction Manual

series Robot Controller
1.3.3

Use of Function Keys

The teach pendant is provided with five (5) function keys (F1 ~ F5) to facilitate
command input.
The functions to which F1 to F5 correspond will change with the mode selected.
The command menu corresponding to each function key is displayed at the bottom
of the display. Select a desired command by means of the function key.
When six (6) or more commands are available in the menu, mark ">" appears on the
right end of the menu line. Press the NEXT key then, and the remaining command
menu is displayed.
Example 1: When selecting the "FILE" command:
M O D E : T E A C H I N G / C O N T
E D I T D E D I T
Press the F5 key, and the FILE display is called with new menu displayed. Select a
desired function key consecutively.
[Supplementary descriptions]
Notes:
1. When the function key is pressed in turn, the hierarchy deepens with the
relevant new menu displayed. To return to the original hierarchical menu,
press the ESC key.
2. In principle, the NEXT key is used to select the NEXT command menu.
Unless mark ">" is available on the display, however, it can serve as the NEXT
PAGE key.
1 2 3 4 5 6 7 8 . 1 2 3
S E L R U N
– 1-11 –
OPERATOR'S MANUAL
Title display
area
L : 9 9 9 9
O : 1 0 0 %
M : F R E E
S : S T O P
R E S E T
Command
input area
Menu display
F I L E >
area
STE 80730
F 1