series Robot Controller
2.3.5
Turning Off the Main Power (TSL3100)
(1) Function
Turns off the main power to stop controller processes.
(2) Procedures
(a) Procedure 1:
Set the no-fuse circuit breaker mounted outside the controller to the OFF
position.
The "POWER" and "READY" LEDs on the controller front panel turn off.
(3) Cautions
• DO NOT turn off the main power while the servo power is on or during file
operations or other processes.
• Before turning off the main power, be sure to always turn off the servo power
and check that no processes are currently running.
Turning off the main power
– 2-16 –
OPERATOR'S MANUAL
Go off
STE 80730