Character Input; Character Input Mode Selection - Toshiba TS3000 Series Instruction Manual

series Robot Controller
4.2

Character Input

4.2.1

Character Input Mode Selection

(1) Function
This mode allows characters to be entered at the cursor position on the editing
display through the keyboard. Edit commands can be input directly.
(2) Procedures
(a) Step 1:
If the command select mode is selected, press the ESC key, and system
returns to the character input mode. Use this operation to return to the
character input mode without menu selection.
[Each function]
(3) Cautions
• When the program editor has started up, the character input mode becomes
effective.
• After the command menu has been selected, the system automatically
returns to the character input mode.
• In the character input mode, the cursor can be moved up and down, right
and left on the editing display, using the cursor keys (, , , ).
Mode selection.
[ESC]
Com m and s elec t m ode
(f or s elec ting c om m and
m enu)
Charac ter input m ode
(f or enter ing
c har ac ters )
– 4-5 –
OPERATOR'S MANUAL
STE 80730