Entry Of Alphanumeric Characters And Symbols - Toshiba TS3000 Series Instruction Manual

series Robot Controller
1.3.1

Entry of Alphanumeric Characters and Symbols

The alphabet input mode and numeric input mode can be changed over alternately
by pressing the
lamp is illuminated.
(1) Numeric key input
Select the numeric input (NUM) mode and press a desired key.
Example:
(2) Alphabet and symbol key input
(2)–1 Alphabet key input
Select the alphabet input (ALPH) mode. Alphabets are classified into
eight (8) groups. Press an appropriate key until a desired alphabet is
displayed. After the alphabet is displayed, press the EXE key, right
cursor key or any other group key, and it is established.
Even if the ALPH mode is selected, pressing the key once calls a number
and you can input the number thus called.
Example:
Press the key three (3) times.
When alphabet "B" is
displayed, press the EXE key.
(2)–2 Symbol (special character) key input
SYMBOL
NUM
ALPH key. While the numeric input mode is selected, the key
When entering number "9":
Key operation
_9_
WXYZ
When entering alphabet "B":
Key operation
_2_
ABC
Every time the SYMBOL key is pressed, a special character
is displayed.
Though input is possible in both the NUM and ALPH modes,
Display
9
Display
B
– 1-9 –
OPERATOR'S MANUAL
STE 80730