series Robot Controller
8.5
Startup
(1) Function
Starts an automatic operation under the predetermined conditions.
(2) Procedures
(a) Startup by using the start signal in the external signal mode:
Input the start signal.
For the start signal, see the Interface Manual.
(b) Startup by data communication in the "EX. 232C" mode and "EX. ETHER"
mode:
Start up the program through data communication.
For the data communication, see the Communication Manual.
M O D E : E X .
B R E A K
(3) Cautions
•
Startup can be performed, using the "startup" signal or data communication.
•
In the external control signal mode, only the "startup" signal is effective. In
the host mode, only the startup by data communication takes effect.
•
The RUN switch on the control panel is inoperative.
S I G
/ C O N T
S T O P
– 8-9 –
OPERATOR'S MANUAL
T E S T
L :
O : 1 0 0 %
M : F R E E
S : R U N
W A T C H
1 4
STE 80730