[Alarm Time (Second) (Obj. 2A00H: 04H)]; [Alarm Time (Nanosecond) (Obj. 2A00H: 05H)]; [Alarm Time (Time Zone) (Obj. 2A00H: 06H)]; [Alarm Time (Summer Time) (Obj. 2A00H: 07H)] - Mitsubishi Electric MELSERVO-J5 Series User Manual

[Alarm time (second) (Obj. 2A00h: 04h)]

Data Type Access
U32 RO
Description
The alarm time is returned as a 32-bit integer (time passed from January 1, 1970, 0:00:00.000000000).
If time data cannot be obtained from the network, alarm occurrence time shows the cumulative power-on time from January 1,
1970, 0:00:00.000000000.
Use this object together with [Alarm time (nanosecond) (Obj. 2A00h: 05h)] according to the system.

[Alarm time (nanosecond) (Obj. 2A00h: 05h)]

Data Type Access
U32 RO
Description
The digits after the ones indicating a second in alarm time are returned as a 32-bit integer. A value is returned in units of
nanoseconds, but only the values in milliseconds increase.
For example, if an alarm occurs on January 1, 2000, 12:00:00.001, "000F4240h (1000000)" will be returned.

[Alarm time (time zone) (Obj. 2A00h: 06h)]

Data Type Access
I32 RO
Description
The time zone at an alarm occurrence time is returned as a 32-bit integer.
If no setting exists, "80000000h" will be returned.

[Alarm time (summer time) (Obj. 2A00h: 07h)]

Data Type Access
I32 RO
Description
The daylight saving time at an alarm occurrence time is returned as a 32-bit integer.
If no setting exists, "80000000h" will be returned.
Mapping Default
Impossible 00000000h
Mapping Default
Impossible 00000000h
Mapping Default
Impossible 00000000h
Mapping Default
Impossible 00000000h
Range Units
00000000h to second
FFFFFFFFh
Range Units
00000000h to nanosecond
FFFFFFFFh
Range Units
80000000h to minute
7FFFFFFFh
Range Units
80000000h to minute
7FFFFFFFh
6.1 [Alarm history newest (Obj. 2A00h)]
Save Parameter
Possible Alarm history
Save Parameter
Possible Alarm history
Save Parameter
Possible Alarm history
Save Parameter
Possible Alarm history
6 Alarm Objects
6
45