Henny Penny Velocity Series Operation Manual page 92

Program
Code
FC-25
FC-26
FC-27
FC-28
82
Display
START-UP MIX: PRE-HEAT
MAX TEMP
START-UP MIX: DROP OIL:
TIME
START-UP MIX: FILTER: TIME
START-UP MIX: NORMAL FILL
TIME
Description
Press the + or - button to select either Mix or
Daily, and if Mix, YES or NO to run
automatically.
The Start-up Mix procedure consists of two
steps: 1. Heat up the oil to the Mix Preheat
temperature and 2. Drop the oil, filter, and re-
fill the pot.
1 1 . . Enter a new value by using the product
numbers.
2 2 . . Press "" to accept the new value.
3 3 . . Press "X" to return to default or previous
setting.
Controls the time duration of the draining of
the pot.
1 1 . . Enter a new value by using the product
numbers.
2 2 . . Press "" to accept the new value.
3 3 . . Press "X" to return to default or previous
setting.
This setting specifies how long the oil should
be circulated during the FILTER phase of the
Start-up Mix.
1 1 . . Enter a new value by using the product
numbers.
2 2 . . Press "" to accept the new value.
3 3 . . Press "X" to return to default or previous
setting.
The expected time it takes to refill the vat at
the end of a Start-up Mix operation.
1 1 . . Enter a new value by using the product
numbers.
2 2 . . Press "" to accept the new value.