Henny Penny Velocity Series Operation Manual page 88

Program
Code
FC-12
FC-13
FC-14
FC-15
FC-16
78
Display
POLISH: DROP OIL: TIME
POLISH: DROP OIL: DRAIN
OPENING
POLISH: FILTER: TIME
POLISH: FILTER: DRAIN
OPENING
POLISH: NORMAL FILL TIME
Description
During the Drop cycle, controls the duration
of time the vat drains.
1 1 . . Enter a new value by using the product
numbers.
2 2 . . Press "" to accept the new value.
3 3 . . Press "X" to return to default or previous
setting.
During the Drop cycle, controls how far to
open the drain valve.
1 1 . . Enter a new value by using the product
numbers.
2 2 . . Press "" to accept the new value.
3 3 . . Press "X" to return to default or previous
setting.
At the end of the Drop cycle, controls how
long the filter pump runs for the specified fil-
ter time.
1 1 . . Enter a new value by using the product
numbers.
2 2 . . Press "" to accept the new value.
3 3 . . Press "X" to return to default or previous
setting.
At the end of the Drop cycle, controls how far
the drain closes to a partially open position.
1 1 . . Enter a new value by using the product
numbers.
2 2 . . Press "" to accept the new value.
3 3 . . Press "X" to return to default or previous
setting.
The expected time it takes to refill the vat at
the end of a Polish operation. When refilling
the vat, if the fryer pumps for one and a half