Snmp Traps Screen - Cabletron Systems DLE52-MA User Manual

Chapter 5 LM: Overview, Setup, and Chassis Management
To establish community names, proceed as follows:
1. Use the arrow keys to highlight the Community Name field adjacent
to the selected access level.
2. Enter the password in the field (maximum 31 characters).
3. Press ENTER.
4. Repeat steps 1 through 3 to modify the other community names.
5. Use the arrow keys to highlight SAVE at the bottom of the screen and
press ENTER. The message "SAVED OK" displays. The community
names are saved to memory and their access modes implemented.

5.10 SNMP TRAPS SCREEN

Since the DLM6C-AA is an SNMP compliant device, it can send
messages to multiple Network Management Stations to alert users of
status changes. The SNMP Traps screen is shown in Figure 5-10.
To access the SNMP Traps screen from the Chassis Menu screen, use the
arrow keys to highlight the SNMP TRAPS menu item and press ENTER.
The Chassis SNMP Traps screen displays.
5-28 DLE02-MA/DLE52-MA User's Guide