B.1 Setting The Mode Switches - Cabletron Systems DLE52-MA User Manual

SWITCH SETTINGS, UPGRADES, AND
This appendix covers the following items:
• Setting the mode switches (Section B.1)
• Installing the DRAM SIMM (Section B.2)
• Location for installing HSIMs or VHSIMs (Section B.3)
You need an antistatic wrist strap (provided with DLM6C-AA
!
chassis) to perform the procedures in this appendix. Use the
antistatic wrist strap when performing any of the procedures in
this appendix to minimize ESD damage to the devices involved.
B.1 SETTING THE MODE SWITCHES
Read the appropriate sections to be fully aware of the
!
consequences when changing switch settings.
Only qualified personnel should change switch settings.
These switches are set at the factory and do not need to be changed unless
you intend to perform the following:
• Force download a new image file from a BootP server.
• Clear NVRAM and restore all user-entered parameters such as the IP
address and Subnet Masks to the DLE02-MA and the DLE52-MA
"Default" configuration settings.
• Clear user-entered passwords stored in NVRAM and restore the
default passwords.
DLE02-MA/DLE52-MA User's Guide
APPENDIX B
INSTALLATIONS
B-1