Built-In Commands - Cabletron Systems DLE52-MA User Manual

7.1.1

Built-in Commands

The built-in commands listed in this section activate functions on the
managed device or devices being accessed through Network Tools.
arp:
Syntax:
Description:
You can specify the arp command without options, or with one of the
following options:
Options:
DLE02-MA/DLE52-MA User's Guide
arp <options>
The arp command provides access to the ARP (Address
Resolution Protocol) cache, enabling you to view cache
data, delete entries, or add a static route. Super-User
access is required to delete an entry or add a static route.
Each ARP cache entry lists the network interface that the
device is connected to, the device's network address or IP
address, the device's physical address or MAC address,
and the media type of connection to the device. Media
types are displayed as numbers, which stand for the
following states:
1 - Other
2 - Invalid entry (cannot ping device, timed out, etc.)
3 - Dynamic route entry
4 - Static route entry (not subject to change)
-a Views cache data
-d Deletes an IP address entry. Requires additional
arguments: <Interface Number> <IP address>
-s Adds a static entry. Requires additional arguments:
<Interface Number> <IP address> <MAC address>
-f Flushes the ARP cache
Network Tools
7-3