Cabletron Systems DLE52-MA User Manual page 179

reset:
Syntax:
Description:
The Network Tools connection to the module will be terminated
upon execution of this command.
Options:
Example:
show:
Syntax:
Description:
Options:
DLE02-MA/DLE52-MA User's Guide
reset
The reset command allows a soft reset of the device. The
user will be queried to confirm the reset command to
insure against unwanted resets.
Not Applicable
-> reset
RESET: Are you *SURE*? -> Y
show [PROTOCOL] [TABLE]
The show command displays information concerning
various components of the device. Protocols currently
supported are IP, IPX, DECnet, and AppleTalk.
Components of those protocols that are currently
supported are ARP caches, route tables, FIB tables, server
tables, and interface tables. The number of valid entries in
the table will be displayed at the end of the table display.
Not Applicable
Network Tools
174245
7-7