Setting The Chassis Time - Cabletron Systems DLE52-MA User Manual

It is not necessary to add separators between month, day, and
year numbers. For example, to set the date to 06/17/1998, type
"06171998" in the Chassis Date field.
3. Press ENTER to set the system calendar to the date in the input field.
4. Use the arrow keys to highlight the SAVE command at the bottom of
the screen and press ENTER.
If the date entered is a valid format, the Event Message Line at the top of
the screen displays "SAVED OK". If the entry is not valid, Local
Management does not alter the current value, but it does refresh the
Chassis Date field with the previous value.
Upon saving the new chassis date, all interface modules
installed in the chassis recognize the new value as the current
date.
5.8.4

Setting the Chassis Time

To set the chassis clock, perform the following steps:
1. Use the arrow keys to highlight the Chassis Time field.
2. Enter the time in this 24-hour format: HH:MM:SS
When entering the time in the system time field, separators
between hours, minutes, and seconds do not need to be added
as long as each entry uses two numeric characters. For
example, to set the time to 6:45
Chassis Time field.
3. Press ENTER to set the system clock to the time in the input field.
4. Use the arrow keys to highlight the SAVE command at the bottom of
the screen and press ENTER.
If the time entered is a valid format, the Event Message Line at the top of
the screen displays "SAVED OK". If the entry is not valid, Local
Management does not alter the current value and refreshes the Chassis
Time field with the previous value.
DLE02-MA/DLE52-MA User's Guide
Chassis Configuration Screen
.
., type "064500" in the
A M
5-23