Installing The Dram Simm - Cabletron Systems DLE52-MA User Manual

B.2.2

Installing the DRAM SIMM

Observe all antistatic precautions when handling sensitive
!
electronic equipment.
To install a DRAM SIMM, refer to Figure B-3 and proceed as follows:
1. With the SIMM alignment notch oriented as shown in Figure B-3,
insert the SIMM down between the connector teeth.
2. Pivot the SIMM downward so the connector clips align with the two
side notches of the SIMM and the connector clips lock the SIMM into
place.
Connector
Clip
Side Notch
2
DLE02-MA/DLE52-MA User's Guide
SIMM
Figure B-3 Installing the DRAM
Connector
Teeth
1
Alignment Notch
Side Notch
SIMM Upgrade
Clip
2504-91
B-5