Cabletron Systems DLE52-MA User Manual page 176

Chapter 7 Network Tools
Example:
bridge:
Syntax:
Description:
Options:
Example:
7-4
-> arp -a
# Interface Network Address
# (SonicInt) 122.144.40.111
# (SonicInt) 122.144.48.109
# (SonicInt) 122.144.52.68
# (SonicInt) 122.144.21.43
-> arp -d 1 122.144.52.68
-> arp -s 1 22.44.2.3 00:00:0e:03:1d:3c
-> arp -f
bridge [ENABLE/DISABLE] [IFNUM/ALL]
The bridge command allows each bridge port to be
enabled or disabled at the user's request, either one at a
time or all at once. Specifying a single interface number
will affect the bridging status of that interface, while
specifying ALL will affect every interface.
Not Applicable
-> bridge disable all
-> bridge enable 1
-> bridge disable 1
Physical Address
00.00.0e.12.3c.04
00.00.0e.f3.3d.14
00.00.0e.12.3c.04
00.00.0e.03.1d.3c
DLE02-MA/DLE52-MA User's Guide
Media Type
3(dynamic)
3(dynamic)
3(dynamic)
3(dynamic)
051467
051468