Cabletron Systems DLE52-MA User Manual page 182

Chapter 7 Network Tools
link_trap:
Syntax:
Description:
Options:
Example:
atm_stp_state:
The atm_stp_state command is only available if an
DELHA-UA is installed in the DLE52-MA. This command allows
the user to enable, disable, or check the current status of the
Spanning Tree Algorithm on all ATM interfaces.
Syntax:
Description:
Options:
7-10
link_trap [enable/disable/status] [PORT/all]
The link_trap command allows link traps to be enabled or
disabled when specifying a single port, or simultaneously
when specifying "all" or no ports. When one or all ports
are specified to enable, disable, or find their status, their
current condition is displayed.
Not Applicable
-> link_trap status
LINK TRAP STATUS:
Port 1 is ENABLED
Port 3 is ENABLED
-> link_trap disable 2
Link traps have been DISABLED on port 2
-> link_trap disable all
Link traps have been DISABLED on all ports (1-24)
-> link_trap status 3
Link traps are ENABLED on port 3
atm_stp_state [STATE]
The atm_stp_state command allows the user to enable,
disable, or check the status of the Spanning Tree
Algorithm on all ATM interfaces. The user must specify
the STATE option as enable, disable, or status. The STATE
field is mandatory.
enable, disable, status
Port 2 is DISABLED
Port 4 is ENABLED
DLE02-MA/DLE52-MA User's Guide
linktrap