Setting The Subnet Mask; Setting The Chassis Date - Cabletron Systems DLE52-MA User Manual

Chapter 5 LM: Overview, Setup, and Chassis Management
Message Line displays "INVALID IP ADDRESS OR FORMAT
ENTERED". Local Management does not alter the current value and
refreshes the IP address field with the previous value.
4. Use the arrow keys to highlight the SAVE command, then press
ENTER. The "SAVED OK" message displays indicating that the
changes have been saved to memory.
5.8.2

Setting the Subnet Mask

If the management workstation that is to receive SNMP traps from the
DLM6C-AA is located on a separate subnet, the subnet mask for the
DLM6C-AA must be changed from its default.
To change the subnet mask from its default, perform the following steps:
1. Use the arrow keys to highlight the Subnet Mask field.
2. Enter the subnet mask into this field using Decimal Dotted Notation
(DDN) format.
For example: 255.255.255.0
3. Press ENTER. If the subnet mask is valid, the cursor returns to the
beginning of the Subnet Mask field. If the entry is not valid, the Event
Message Line displays "INVALID SUBNET MASK OR FORMAT
ENTERED". Local Management does not alter the current value, but
it does refresh the Subnet Mask field with the previous value.
4. Use the arrow keys to highlight the SAVE command, then press
ENTER. The changes are saved to memory.
5.8.3

Setting the Chassis Date

The DLM6C-AA is year 2000 compliant, so the Chassis Date may be set
beyond the year 1999. To set the chassis date, perform the following
steps:
1. Use the arrow keys to highlight the Chassis Date field.
2. Enter the date in this format: MM/DD/YYYY
5-22 DLE02-MA/DLE52-MA User's Guide