Chapter 3 Local Management; Local Management Screen Overviews; The Wan Physical Configuration Screen - Cabletron Systems WPIM-S/T User Manual

Chapter 3: Local Management
Make sure that the following requirements have been met before
accessing the WPIM-S/T through Local Management:
• The WPIM-S/T is properly installed in the host platform.
• A management terminal is properly configured and connected, either
locally or using Telnet, to the host platform in which the WPIM-S/T
resides. Refer to the host platform documentation for further
information.
3.1

LOCAL MANAGEMENT SCREEN OVERVIEWS

The following subsections describe the screens used to configure
theWPIM-S/T in Local Management.
3.1.1 The WAN Physical Configuration Screen
The WAN Physical Configuration screen is used to access the WPIM or
"Physical Interface" for configuration. To access the WAN Physical
Configuration screen from the Feature Selection screen, use the arrow
keys to highlight the WAN Setup menu item, then press ENTER. The
screen shown in Figure 3-1 displays.
<host name> Local Management
WPIM 1
Type: T1
WPIM #: 1
Mgr Type: [PPP]
Max VCs: 024
Next IF: 007
SAVE [WPIM 2]
Figure 3-1 WAN Physical Configuration Screen
3-2
WAN PHYSICAL CONFIGURATION
WPIM 2
Type: S/T
WPIM #: 2
Mgr Type: [ISDN BRI]
Max VCs: 002
Next IF: N/A
WAN INT CONFIG
Flash Image Version: xx.xx.xx
REMOTE SETUP RETURN
WPIM-S/T User's Guide
148301