Completing The Installation - Cabletron Systems DLE52-MA User Manual

Chapter 3 Installation
e. Ensure that the twisted pair connection meets the dB loss and
cable specifications outlined in the Cabletron Systems Cabling
Guide. Refer to the Preface for information on obtaining this
document.
If a link is not established, contact your DIGITAL representative.
Refer to Getting Help, in the Preface of this guide, for details.
4. Repeat steps 1 through 3 above, until all connections have been made.
3.5

COMPLETING THE INSTALLATION

After installing the DLE02-MA or DLE52-MA and any optional HSIM or
VHSIM, the module is now ready to be set up through Local
Management. Refer to Chapter 5 to set up a Local Management
connection and configure the DLM6C-AA chassis, Chapter 6 to configure
the module, and Chapter 7 for Network Tools.
3-8 DLE02-MA/DLE52-MA User's Guide