Cabletron Systems DLE52-MA User Manual page 181

soft_reset:
Syntax:
Description:
The Network Tools connection to the module will be terminated
upon execution of this command.
Options:
Example:
telnet:
Syntax:
Description:
Options:
Example:
DLE02-MA/DLE52-MA User's Guide
soft_reset
This command restarts the software image, which restores
the user configuration settings from NVRAM. The user
will be queried to confirm the reset command to ensure
against unwanted resets.
Not Applicable
-> soft_reset
RESET: Are you *SURE*? -> Y
telnet [IP address] <Port #>
The telnet command allows the user to communicate with
another host (that supports Telnet connections) using the
Telnet protocol. The user must specify the remote host
using its IP address. The [IP address] field is mandatory.
If no Port number is specified, telnet will attempt to
contact the host at the default port.
<Port #>
-> telnet 134.141.12.345
Trying 134.141.12.345
Connected to 134.141.12.345
SunOS UNIX (server1)
login:
Network Tools
174266
7-9