Cabletron Systems DLE52-MA User Manual page 75

Table 5-3 describes the most common event messages. Event messages
related to specific Local Management applications are described with
those applications throughout this manual.
Message
SAVED OK
NOT SAVED?--PRESS SAVE TO
KEEP CHANGES
NOTHING TO SAVE
Heading
The heading will indicate whether the module was accessed using the
chassis or module IP address. If the chassis IP address was used to access
the module, the heading will be the chassis name, e.g., DLM6C-AA. If
the module IP address was used to access the module, the module name
will be in the heading, the same as listed next to Device Type, e.g.,
DLE52-MA.
Module Type and Slot Number
These fields display only when a module is being accessed through Local
Management. The module type is displayed and the chassis slot number
of the module is displayed. A chassis screen will not display these fields.
Display Fields
Display fields cannot be edited. These fields may display information that
never changes, or information that may change as a result of Local
Management operations, user selections, or network monitoring
information. In the screens shown in this guide, the characters in the
DLE02-MA/DLE52-MA User's Guide
Local Management Screen Elements
Table 5-3 Event Messages
What it Means
One or more fields were modified,
and saved to NVRAM.
Attempting to exit the LM screen
after one or more fields were
modified, but not saved to NVRAM.
The SAVE command was executed,
but no changes were made that
required saving.
5-9