Using The Next And Previous Commands; Using The Clear Counters Command; The Main Menu Screen - Cabletron Systems DLE52-MA User Manual

5. Press ENTER. The Local Management Password screen displays and
the session ends.
5.5.4

Using the NEXT and PREVIOUS Commands

If a particular Local Management screen has more than one screen to
display its information, the NEXT and PREVIOUS commands are used to
navigate between its screens.
To go to the next or previous display of a screen, proceed as follows:
1. Highlight the applicable NEXT or PREVIOUS command at the
bottom of the screen.
2. Press ENTER. The screen displays.
5.5.5

Using the CLEAR COUNTERS Command

The CLEAR COUNTERS command is used to momentarily reset all
counters of a screen to zero to allow the user to observe counter activity
over a period of time. To reset the counters, perform the following steps:
1. Use the arrow keys to highlight the CLEAR COUNTERS command.
2. Press ENTER, the counters are reset to zero, and the counter will start
up again immediately.
5.6

THE MAIN MENU SCREEN

The Main Menu Screen is the access point for all Local Management
screens for the modules and the DLM6C-AA chassis. Figure 5-6 shows
the Main Menu screen.
DLE02-MA/DLE52-MA User's Guide
The Main Menu Screen
5-15