Selecting Local Management Menu Screen Items; Exiting Local Management Screens - Cabletron Systems DLE52-MA User Manual

Chapter 5 LM: Overview, Setup, and Chassis Management
5.5.2

Selecting Local Management Menu Screen Items

Select items on a menu screen by performing the following steps:
1. Use the arrow keys to highlight a menu item.
2. Press ENTER. The selected menu item displays on the screen.
5.5.3

Exiting Local Management Screens

There are two ways to exit Local Management (LM).
Using the EXIT Command
To exit a Local Management screen using the EXIT command, proceed as
follows:
1. Use the arrow keys to highlight the EXIT command at the bottom of
the Local Management screen.
2. Press ENTER. The Chassis Main Menu screen displays and the
session ends.
Using the RETURN Command
To exit LM using the RETURN command, proceed as follows:
1. Use the arrow keys to highlight the RETURN command at the bottom
of the Local Management screen.
2. Press ENTER. The previous screen in the Local Management
hierarchy displays.
The user can also exit Local Management screens by pressing
ESC twice. This exit method does not warn about unsaved
changes and all unsaved changes are lost.
3. Exit from Local Management by repeating steps 1 and 2 until the
Device Menu screen displays.
4. To end the LM session, use the arrow keys to highlight the RETURN
command at the bottom of the Device Menu screen.
5-14 DLE02-MA/DLE52-MA User's Guide