Using The Reset Button - Cabletron Systems DLE52-MA User Manual

4.3

USING THE RESET BUTTON

The RESET button located near the upper plastic locking tab of the
module (refer to Figure 4-2) resets the DLE02-MA and the DLE52-MA
processor without affecting the NVRAM.
Pressing the RESET button resets the device, and all current
!
switching being performed by the module is halted. A module
downtime of up to two minutes results from this action.
Reset Button
To reset the DLE02-MA and the DLE52-MA processor, press and release
the RESET button. To push the button, use a pen or similar tool, as the
button is recessed behind the metal plate of the front panel. The module
processor goes through a reset process of approximately 60 seconds.
Additional downtime may be added as the module reenters the network.
DLE02-MA/DLE52-MA User's Guide
FAST ENET
DLE02-MA
RESET
Figure 4-2 RESET Button
Using the RESET Button
4-11