Installation; Operation System Of The Control Computer - 3D Histech PANNORAMIC SCAN RX User Manual

PANNORAMIC® SCAN RX 1.0

2 Installation

Warning!
The installation of Pannoramic® SCAN RX must be carried out by a trained professional! In
any other case the warranty will be automatically voided. The supplier or distributor is not
liable for any damages caused by an installation carried out by an unauthorized person.
Only qualified service assistants are allowed to install the hardware and software. The
product is ready for use after installation.
Caution!
Make sure that the device is placed so that there is enough space for ventilation and for safe
and efficient operator maintenance.
Caution!
If the temperature of the location where the scanner is operated is much lower than the
temperature of the equipment (for example, the device is brought in from an outer storage,
or has been transported to the site), please leave enough time to normalize the
temperature differences before operating the device within the safe range.

2.1 Operation System of the Control Computer

The scanner is operable with a Fujitsu CELSIUS M7010 as the control computer that runs Windows
10 (see table Control computer, minimum system requirements in chapter
Third-party antivirus programs can affect the operation of the software, but we are not
responsible for any resulting problems.
MAY 13, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
INSTALLATION
10 Technical Data).
24