PANNORAMIC® SCAN RX 1.0
•
–
Edit
The size of selected area (positive or negative) can be modified at the
borderlines or corners.
•
Crop
– Crop the area of the selected area.
•
Place Circle
the Preview toolbar.
•
Place focus point
coordinates of the manual focus points you add are listed on the Focus settings panel.
Notice:
The maximum number of focus points that you can manually add is 100.
MAY 13, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
Figure 75. Edited negative and positive selection masks
–
You can select the area to be scanned with the different tools on
–
You can add manual focus points on the preview image – the
SCANNING MODES AND SETTINGS
92