Installation; Control Computer Ports - 3D Histech Pannoramic DESK II User Manual

Pannoramic DESK II 1.22 User's Guide

2 Installation

The installation of Pannoramic DESK II must be carried out by a trained
professional!
In any other case the warranty will be automatically voided.
The supplier or distributor is not liable for any damages caused by an
installation carried out by an unauthorized person.
Only qualified service assistants are allowed to install the hardware and software. The product is
ready for use after installation.

2.1 Control computer ports

The following figure shows the location of the connectors in order to enable easier transportation of
the product for a short distance, by disconnecting cables and detaching hardware components from
each other.
June 24, 2016
Warning!
Figure 4 – Ports on control computer
3DHISTECH Ltd.
2 Installation
19(76)