PANNORAMIC® SCAN RX 1.0
–
Open profile
The Profile Browser window containing a list of previously saved profiles is opened. Based on the
Illumination type, profiles are grouped into two clusters: Brightfield and Fluorescence. Additional
profiles can be created by clicking Create. You can also search for a specific profile by filtering
based on the following data:
•
Objective type
•
Multilayer mode
•
Illumination
•
Filters
•
Modify date
•
Last use date
MAY 13, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
Figure 29. Profile browser window
SOFTWARE DESCRIPTION
53