3D Histech PANNORAMIC SCAN RX User Manual page 94

PANNORAMIC® SCAN RX 1.0
•
Rectangle tool
•
Ellipse tool
•
Polygon tool
by double-clicking with the mouse at or near the starting point.
•
TMA tool
the selection settings on the following four tabs:
•
TMA Grid Setting
placed on the preview image. Set grid parameters (row and column numbers) and spot
shape (round or rectangle).
Delete TMA grid by clicking the X at the top right corner and rotate grid by clicking the
icon at the bottom right corner. Enter the number of rows and columns in the Rows and
Columns fields or select the appropriate values with the arrows. Enter the distance
between two spots on the X and the Y axis in µm in the Core distance fields or select the
appropriate values with the arrows. Enter the average diameter of the spots in the Core
size field or select the appropriate value with the arrows.
MAY 13, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
–
Draw rectangle shaped area.
–
Draw ellipse selection.
–
Area selection by defining a polygon shape. Finish area selection
–
TMA tool is used for selecting TMA spots on TMA slides. You can set
Figure 76. TMA tool
– This function is enabled only if a TMA grid has already been
Figure 77. TMA tool: Grid selector
SCANNING MODES AND SETTINGS
93