PANNORAMIC® SCAN RX 1.0
5.3.2 General Functions at the Magazine Menu
Rack view mode selector
Switch view by clicking the
and
to remove a virtual magazine from the planner.
Profile management for selected magazine includes the following global settings
applicable to all magazines:
•
Add current profile for all slides
•
Open profile to all slides
•
Detach current profile from all slides
•
Detach profiles from slides
•
Clear all slide results
5.3.3 General Functions at the Slide Menu
•
Mark empty slide positions – Define range in the Range to skip boxes to set multiple slide
positions as empty. For a single slide, enter / set slide position with the arrows in the
Range to skip box or right-click on a slide and select Skip.
•
Click Reset at the Slides settings bar to cancel slide selections as empty, or right-click the
thumbnail of a slide selected as skipped and click Reset.
•
You can apply a selected profile to a defined range of slides at the Profile range section.
Set the slide positions within the range (first and last slide) then click
MAY 13, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
button. Click
Figure 99. Rack view mode selector
Figure 100. General functions at the slide menu
SCANNING MODES AND SETTINGS
to add a virtual magazine to the planner,
.
106