3D Histech PANNORAMIC SCAN RX User Manual page 53

PANNORAMIC® SCAN RX 1.0
–
Start Scan: Scanning of the actual slide or performing the whole previously planned
scanning procedure can be initiated.
–
Stop Scan
–
Stop actual progress
–
Take All Previews
Each preview of slides in the tray is taken automatically. Preview types are the following (from
top to bottom):
•
Brightfield
•
Pre-Scan (FL)
•
Pre-Scan High-Resolution (FL)
•
Pre-Scan + High-Resolution (FL)
Activate Retake Preview for all the slides in the magazine if necessary. This operation can be
initiated from the slide preview window as well. Pannoramic® Scanner Software for Research
control software automatically saves the preview image of a slide that is loaded into the scanner
and of which a preview image is recorded.
Whenever you add a new magazine (in Planner mode as well) the software asks you whether the
magazine has previously been loaded or not. Click Yes if the magazine has already been
processed, then enter the number of the magazine used during the process, otherwise click No.
– :
Auto attach Actual profile is assigned to the loaded slide automatically.
MAY 13, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
Figure 28. Take all previews selector
SOFTWARE DESCRIPTION
52