3D Histech PANNORAMIC SCAN RX User Manual page 13

PANNORAMIC® SCAN RX 1.0
Caution!
Do not position the equipment so that it is difficult to operate and to disconnect the device
if necessary.
Notice:
The safety level of the equipment after servicing will be identical with level of the original
equipment.
Notice:
Electric power to the Pannoramic® SCAN RX is supplied via an external mains power supply
unit. It allows for operation at line voltages in the range of 100 V to 240 V ±10%, 50/60 Hz,
without any extra facilities required for voltage transformation.
MAY 13, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
NOTES REGARDING OPERATIONAL SAFETY
12