PANNORAMIC® SCAN RX 1.0
5.2.2 Microscope Control Panel
5.2.2.1
Preview Window
Click
to open the Preview panel that offers options for threshold setting and
selection of the area to be scanned.
Threshold options
This section is located at right side of the preview window. Scanmap Source is designed to
set which type of scanmap is used on the preview image. This scanmap is displayed
automatically in the Profile Scanmap Source setting. Selectable scanmap types are the
following:
•
Use threshold
•
Load previously saved scanmap from file
•
Custom scan map
MAY 13, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
Figure 71. Pre-scan preview image
SCANNING MODES AND SETTINGS
87