3D Histech PANNORAMIC SCAN RX User Manual page 110

PANNORAMIC® SCAN RX 1.0
By clicking or profiles can be added or removed for/from the slide, respectively. The
parameters of the assigned profile are displayed in a card. The colors of a Brightfield and a
Fluorescence profile cards are different.
The following information are included in a profile card:
•
Profile name in the top left corner.
•
Profile status is marked with spots of different color:
o –
Stored
o –
Edited
•
Scanning mode icon representing Brightfield or Fluorescence mode
•
Objective type
•
Filter channel color bars (for FL mode only)
•
Scan progress
•
No. of scanned FOVs
•
Scan duration
•
Priority scan
•
Slide: actual status of the slide is presented here. If the slide is under scanning, the
"Scanning", if scanning has been interrupted by some error, the "Failed" text is visible. If
slide status is marked as "Failed", delete status by clicking
If the virtual slide is created (the scanning is finished), the location path of the destination
folder is displayed. To re-scan and thus recreate the slide, click
displayed path to start the scanning process over.
•
Scan properties
•
Profile editor for Scheduler
MAY 13, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
Figure 105. Brightfield and fluorescence profile cards
SCANNING MODES AND SETTINGS
before re-scanning.
at the front of the
109