3D Histech PANNORAMIC SCAN RX User Manual page 47

PANNORAMIC® SCAN RX 1.0
Quant settings
•
Run QuantCenter™: Turn this function on for automatic evaluation of the completed
digital slide by using the integrated QuantCenter™, right after the scanning has finished.
Warning!
Make sure that the proper Quant probe (XML file) is selected for the quantification of the
slide, as the resulting measurement data will be incorrect.
Notice:
The Pannoramic® Scanner Software for Research software is compatible with licensed
QuantCenter™ application only, otherwise the control software may close due to an error.
Click to assign the appropriate Quant probe to the digital slide.
If the scanning of slide has finished, the progress of Quant evaluation is displayed in the
QuantCenter™ Processing Queue window.
For further information on QuantCenter™, please read QuantCenter™ User's Guide.
Other settings
•
Scan separately: The FOV areas of the preview image will be scanned and saved
separately as discrete digital slides.
MAY 13, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
SOFTWARE DESCRIPTION
46