Declaration Of Conformity - 3D Histech PANNORAMIC SCAN RX User Manual

PANNORAMIC® SCAN RX 1.0

Declaration of Conformity

3DHISTECH Ltd. declares that the product Pannoramic® SCAN RX slide scanner is designed and
produced with consideration of specified requirements according to the standards listed below:
IEC 61010-1:2010, "Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use – Part 1: General Requirements"
IEC 61010-2-081:2015, "Safety requirements for electrical equipment for measurement, control and
laboratory use – Part 2-081: Particular requirements for automatic and semi-automatic laboratory
equipment for analysis and other purposes"
There is no further operator (user) action required in case of residual risks.
Further information may be obtained from the manufacturer:
3DHISTECH Ltd.
3 Öv Street
1141 Budapest – HUNGARY
MAY 13, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
DECLARATION OF CONFORMITY
6