Notes On Warranty - 3D Histech PANNORAMIC SCAN RX User Manual

PANNORAMIC® SCAN RX 1.0

Notes on Warranty

3DHISTECH Ltd. – as the Product Manufacturer – warrants the Pannoramic® SCAN RX to be free
from faults in material and workmanship at the moment of installation. Defects must be notified
immediately on identification and maximum efforts must be undertaken to minimize the amount
of damage as small as possible. On receiving notice of a fault, the Product Manufacturer will be
under obligation to remove the fault, at his own option, either by providing adequate repair
services or by delivering a faultless product for replacement. No warranty will be accepted in
cases of natural wear (notably, wear and tear parts) or improper product handling.
The Product Manufacturer will refuse any liability in the event of damage resulting from faulty
operation, negligence, or unauthorized intervention into the product, notably, from the
replacement of product parts or the usage of accessory parts from other manufacturers. Any
such case will void the user's claim for warranty.
Except for actions which are explicitly described in this User's Guide, you are prohibited from
performing any kind of maintenance or repair work at the Pannoramic® SCAN RX. Only
3DHISTECH Service personnel or specifically authorized representatives are allowed to handle
repair work. In case of malfunction, contact the 3DHISTECH Service Support first.
MAY 13, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
NOTES ON WARRANTY
13