3D Histech PANNORAMIC SCAN RX User Manual page 49

PANNORAMIC® SCAN RX 1.0
When creating another server connection, define the following details of the server in the
Server Editor window:
•
Display Name
•
Host Name
•
Protocol
Server Editor stores each of the created server in a list. List entries can be removed, or a
new entry can be added if required. With the Filters function you can narrow down the
results by searching for a specific server data. By double-clicking a list item, server data
will be loaded in the Scan to Server panel.
After loading server data, username and password are required to be added for
authentication and accessing the server. If connection is successful, a green checkmark is
displayed in the window.
MAY 13, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
Figure 25. Window of server editor
Figure 26. Connecting to server
SOFTWARE DESCRIPTION
48