3D Histech PANNORAMIC SCAN RX User Manual page 151

PANNORAMIC® SCAN RX 1.0
1.
Open the protective cover (see chapter
2.
Push locking lever (1) to the left and keep the lever in this position.
3.
Seize the slide loader (2) by the end where the lever is and turn it up by the necessary
degree to make the removing of slide possible.
4.
Remove slide loader unit.
MAY 13, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
Figure 129. Removal the slide loader
Figure 130. Removing a slide
9.5.1 Removing the protective
TROUBLESHOOTING AND MAINTENANCE
covers).
150