3D Histech PANNORAMIC SCAN RX User Manual page 45

PANNORAMIC® SCAN RX 1.0
o
Tiled-TIFF settings
▪
Click Reset to set everything to default.
▪
Zero based index in names: Z-Stack layers of the generated TIFF files will
be indexed starting with 0, and the focus distance of the actual layer will
not be included (inactive by default).
▪
Display FL channels RGB-colorized: a 24-/48-bit color TIFF image is
generated based on the FL channels. File size is bigger, but most of the
image viewers are capable to open it. An 8-/16-bit grayscale TIFF image will
be generated if not selected. File size is smaller, but some of the viewers
cannot handle it.
▪
TIFF type
▪
Compression type
▪
Compression rate: default is 80, on a scale of 1-100.
▪
Zoom scale: set the level of zoom at which the TIFF image is created to get
the smallest file size possible.
MAY 13, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
Figure 21. Tiled-TIFF settings
▪
Automatic: the converter automatically selects the most
appropriate method based on the size of the source slide.
▪
Force simple tiff: TIFF files use 32-bit offset addressing; therefore,
file size is limited to a maximum of 4Gb.
▪
Force big tiff: Big TIFF files use 64-bit offset addressing allowing
the creation of bigger TIFF files.
▪
Jpeg (8-bit): compression rate can be set (1-100, default: 80).
▪
Lossless compression 8-bit
▪
Lossless compression native: color depth of the source slide is
inherited (16-bit is supported).
▪
Uncompressed 8-bit
▪
Uncompressed native: color depth of the source slide is inherited
(16-bit is supported).
SOFTWARE DESCRIPTION
44