3D Histech PANNORAMIC SCAN RX User Manual page 71

PANNORAMIC® SCAN RX 1.0
•
TMA tool – TMA tool is used for selecting TMA spots on TMA slides. You can set the
selection settings on the following four tabs:
•
TMA Grid Setting
placed on the preview image. Set grid parameters (row and column numbers) and spot
shape (round or rectangle).
Delete TMA grid by clicking the X at the top right corner and rotate grid by clicking the
icon at the bottom right corner. Enter the number of rows and columns in the Rows and
Columns fields or select the appropriate values with the arrows.
Enter the distance between two spots on the X and the Y axis in µm in the Core distance
fields or select the appropriate values with the arrows. Enter the average diameter of the
spots in the Core size field or select the appropriate value with the arrows.
•
Clear scanmap
MAY 13, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
Figure 47. TMA grid preview
– This function is enabled only if a TMA grid has already been
Figure 48. TMA tool: Grid selector
– The entire scanmap area will be cleared and reset to default.
SCANNING MODES AND SETTINGS
70