Port And Module Color Codes - Cabletron Systems SPECTRUM 1800 User Manual

Using the FRX4000, FRX6000, and SmartSwitch 1800 Hub View
RLP information will only be displayed if the appropriate database record has
been conÞgured via console management (see your hardware documentation for
more information); for RLPs which have been conÞgured in the database but not
yet installed in the chassis, a blue module status will be displayed (see Port and
Module Color Codes, below). RLPs which are present in the chassis but which
have not been conÞgured in the database will not be displayed.
For each conÞgured RLP card, eight serial port status boxes will be displayed
(four for each of two possible LIC cards); however, serial port status information
will only be displayed for ports which are physically present (on an installed LIC
card) and have been conÞgured in the database. Ports which are present but not
conÞgured will display a blank status; if no LIC is present, the value [None] will
be displayed under the appropriate LIC title, and the associated ports will also
display a blank status.
LAN cards will only be displayed when they are both present and conÞgured, as
they are conÞgured during the initial Þrmware installation process, and cannot be
conÞgured unless they are present.

Port and Module Color Codes

Both the module index boxes and the port status boxes are color-coded to indicate
status (see
Module Index boxes
Port Status
boxes
2-4
Figure 2-2, below).
Figure 2-2. Module and Port Color Codes
Using the Hub View