Cabletron Systems SPECTRUM 1800 User Manual page 208

Portable management application for the frx4000, frx6000, and smartswitch 1800
Hide thumbs Also See for SPECTRUM 1800:
Table of Contents

Advertisement

SmartSwitch 1800 Voice Configuration
Country
Haiti
Honduras
Hong Kong
India
Dial Digits
This Þeld speciÞes the number of digits used for speed-dial and auto-dial
numbers. A speed-dial number is a short substitute for a longer number, and an
auto-dial number will be dialed automatically when the receiver is taken
off-hook. The default value for this parameter is 3.
Extended Dial Digits
This speciÞes the number of extended dial digits that must be entered by the user
of attached equipment as part of a dial string when Ext. Digits Source in the Voice
ConÞguration window is set to User (see
Speed-dial numbers and extended digits can be output by remote voice/fax ports.
Extended digits will be forwarded to the remote end of the frame relay connection
if all of these conditions are met:
¥
¥
¥
If the Þrst two conditions are met, but Ext. Digits Source is set to User, the
operator must enter the extended dial digits to be forwarded.
Setting the number of Extended Dial Digits to a value greater than zero reduces
the number of allowable entries in the Voice Speed Dial ConÞguration window.
When the Extended Dial Digits is 0, up to 512 Speed Dial entries can be deÞned.
When Extended Dial Digits is greater than 0, only 256 entries can be deÞned. The
default value for this parameter is 0.
Ring Voltage/Frequency
This parameter speciÞes the voltage and frequency of the telephone ring circuit.
In two-wire OPX/FXS mode, the SmartSwitch 1800 provides ring voltage to the
telephone when it is called by a remote unit. The frequency of ringing voltage is
variable and is a divide by 1, 2, or 3 of the main AC line frequency. The default
value for this parameter is v80-hz-20-00.
12-4
Table 12-1. International Dialing Country Codes
Code Country
509
504
852
91
Extended dial digits are conÞgured in the speed-dial map;
The parameter Forwarded Digits in the Voice ConÞguration window (see
ConÞguring Voice
Ports,
The parameter Ext. Digits Source in the Voice ConÞguration window is set to
Map.
Code Country
Peru
51
Philippines
63
Poland
48
ConÞguring Voice
page
12-8) is set to All or Extended;
Configuring System-Level Voice Parameters
Code
Zaire, Rep.
243
Zambia
260
Zimbabwe
263
Ports,
page
12-8).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spectrum frx4000Spectrum frx6000Spectrum

Table of Contents

Save PDF