IPX Interface Configuration
Adding or Modifying IPX Static Routes
First, access the IPX Static Route ConÞguration window (see
ConÞguration,
To add a new IPX Static Route:
1. Enter the Circuit Index, the Network Number, and the Router Address for
2. Click on
To modify an existing entry:
1. In the list box, click to select the static route you wish to modify. The selected
2. Edit the fields, as desired. If you would like to return to the original values,
3. Click on
To delete an existing entry:
1. In the list box, click to select the static route you wish to delete. The selected
2. Click on
After you have made system-level changes (such as conÞguring an IPX Interface), you
must apply those changes by rebooting the FRX or SmartSwitch 1800 device, or through
NOTE
console management via the [F7] command.
10-14
page
10-12).
each route.
to add your new entry.
entry will be highlighted. (Note that you can only modify one entry at a time.)
click on the Refresh button.
to modify the selected entry.
entry will be highlighted. (Note that you can only delete one entry at a time.)
to delete the selected entry.
IPX Static Route
Configuring IPX Static Routes