Cabletron Systems SPECTRUM 1800 User Manual page 70

Configuring the Trap Table
BSCI: Invalid parameters
One or more parameters speciÞed in the Port Parameters record for this port is
invalid. This error disables the port.
Severity
Action
BSCI: Invalid port number or type
The port number and/or type speciÞed in the Port record is not valid for BSC
Interactive.
Severity
Action
BSCI: Invalid message transfer
Self-explanatory. This error disables the port.
Severity
Action
BSCI: Invalid circuit operations
An invalid operation has occurred and has disabled the port.
Severity
Action
BSCI: Invalid state event action
An invalid operation has occurred and has disabled the port.
Severity
Action
BSCI: Invalid buffer operations
An invalid operation has occurred and has disabled the port.
Severity
Action
BSCI: Invalid CRC operations
An invalid operation has occurred and has disabled the port.
Severity
Action
3-20
Minor (Level 3)
Correct the Port Parameters record, then reenable the port ([B],
[A], [C] from the Main Menu). If this doesnÕt work, take the same
action as for message 500.
Minor (Level 3)
Check the Port record.
Minor (Level 3)
Take the same action as for message 500.
Minor (Level 3)
Take the same action as for message 500.
Minor (Level 3)
Take the same action as for message 500.
Minor (Level 3)
Take the same action as for message 500.
Minor (Level 3)
Take the same action as for message 500.
514
515
516
517
518
519
520
Trap Messages