Adding Or Modifying Speed Dial Numbers - Cabletron Systems SPECTRUM 1800 User Manual

Valid values for the voice concentrator vary depending on the device type; the
numbers below relate to ACT NetworksÕ SDM network access devices.
SDM:
Digits 1-2= Switch number 01-61.
Digits 3-4= Port number 00-15.
Digit 5= Slot number 1-8 if FP or DX. Slot number 1-4 if JFP.
Digit 6= Channel number 0-5 if DVC. Arbitrary (typically 1-6) if FP or JFP.
Extended Dial String
This is an extended set of digits that will be forwarded with the call if Ext. Digits
Source is set to Map in the Voice ConÞguration window (see
Ports,
entered by the operator at the initiating device.
Calls placed to a speed-dial number will go to the device (e.g., PBX) whose full
number is associated with that speed-dial number in the Voice Speed Dial
ConÞguration window. If extended dial digits are included in the table or the call,
the call will automatically be forwarded through the remote device to the
telephone number that matches the extended digits.

Adding or Modifying Speed Dial Numbers

First, access the Voice Speed Dial ConÞguration Window (see
ConÞguration,
To add a new Speed Dial Number:
1. Enter the configurable values for each number.
2. Click on
To modify an existing entry:
1. In the list box, click to select the number you wish to modify. The selected
2. Edit the fields, as desired. If you make some changes, and would like to return
3. Click on
To delete an existing entry:
1. In the list box, click to select the number you wish to delete. The selected
2. Click on
Speed Dial Configuration
page 12-8). If Ext. Digits Source is set to User, any extended digits must be
page 12-5).
to add your new entry.
entry will be highlighted. (Note that you can only modify one entry at a time.)
to the original values, click on the Refresh button.
to modify the selected entry.
entry will be highlighted. (Note that you can only delete one entry at a time.)
to delete the selected entry.
SmartSwitch 1800 Voice Configuration
ConÞguring Voice
Speed Dial
12-7