Bridge Configuration
Configuring Bridge Ports
An FRX or SmartSwitch 1800 bridge port is a LAN interface or a frame relay port
that will operate as a bridge connection to the LAN or WAN respectively. There
are two windows provided to conÞgure bridge ports:
¥
¥
These windows and their functions are described in the following sections.
Configuring Frame Relay Bridge Ports
You can use the Bridge/LLC2 Frame Relay Interface Table to conÞgure a frame
relay port to operate as a bridge connection to the WAN. To access the table:
1. Click on
2. Drag down to Bridge/LLC2 Frame Relay Table, and release. The
11-4
The Bridge/LLC2 Frame Relay Interface Table allows you to conÞgure a
frame relay port to operate as a bridge connection to the WAN; and
The Bridge/LLC2 LAN Interface Table allows you to conÞgure a LAN
interface to operate as a bridge connection to the local LAN.
to display the Device menu.
Bridge/LLC2 Frame Relay Interface Table,
Figure 11-2. Bridge/LLC2 Frame Relay Interface Table
Figure
11-2, will appear.
Configuring Bridge Ports