Adding Or Modifying Ip Interfaces; Adding Or Modifying Secondary Addresses - Cabletron Systems SPECTRUM 1800 User Manual

IP Interface Configuration

Adding or Modifying Secondary Addresses

If you have speciÞed a LAN Interface as your IP Interface Type, you can access the
IP Interface Secondary Address ConÞguration window by clicking on the
Secondary button at the bottom of the IP Interface ConÞguration window.
To add a new IP interface Secondary Address:
1. Enter the Sequence Number, the Source Address, and the other
2. Click on
To modify an existing entry:
1. In the list box, click to select the IP Interface Secondary Address you wish to
2. Edit the fields, as desired. If you would like to return to the original values,
3. Click on
To delete an existing entry:
1. In the list box, click to select the IP Interface Secondary you wish to delete.
2. Click on
After you have made system-level changes (such as conÞguring an IP Interface), you
must apply those changes by rebooting the FRX or SmartSwitch 1800 device, or through
NOTE
console management via the [F7] command.
9-12
configurable values for the secondary address.
to add your new entry.
modify. The selected entry will be highlighted. (Note that you can only modify
one entry at a time.)
click on the Refresh button.
to modify the selected entry.
The selected entry will be highlighted. (Note that you can only delete one
entry at a time.)
to delete the selected entry.

Adding or Modifying IP Interfaces